When you have purchased some bare wood furniture then you’ll need to finish it properly. This isn’t a hard process however there are some steps that you’ll want to observe. The amount of labor involved will depend on the quality of the piece you’ve picked out. When there are blemishes or knots within the wood, these would need to be dealt with as otherwise they may affect your finish. Knots are easy to repair, you simply want to paint them with a shellac based sealer.
When there are any holes or scratches, you will need to fill them with filler. If you plan to color the unit it doesn’t really matter what shade filler you use. But if you intend to use a varnish then you must find purpose made wood filler in as near a match to the wood colour as possible. This will lead to the patching being much less visible.
In the unlikely event that you’ve got an enormous gap to fill, you have to use the filler in stages. You might have seen a bare wood furniture piece that you simply couldn’t resist but maybe it had been damaged in storage.
Filling deep-seated openings can be done and when the product has been properly finished you’ll never know it was there but you need to be careful. You can’t just put a lump of filler into the hole and wish for the best. This may be the quick way of doing things but it’s likely to crack and destroy the overall finish.
So take it slowly, permit each layer to harden before adding any more. When you have had to utilize filler, you’ll have to sand the unit down prior to painting or vanishing. Always vacuum the items following sanding as otherwise you run the danger of dirt particles upsetting the finish in your bare wood furniture.
Find out more about how unpainted furniture stores can help you achieve your home decor goals. Join us on our website: http://www.bare-wood-furniture.com/unfinished-furniture-store/